Jetter JetControl 365MC, Руководство пользователя

Страница: 32 / 148

Jetter AG Electrical connection | 6
User Manual – JetControl 365MC 32 / 148
Position Component
Function with
RS-422 Function with
RS-485
1 Receiver Receives data Unused
2 Receiver/transmitter Transmits data Receives and trans-
mits data
3 Serial line Twisted line of the serial interface
4 R
T
Terminating resistor
Terminating
resistor Connect a terminating resistor to both serial lines in the following cases:
■ Long lines
■ High baud rates
Select a terminating resistor which corresponds to the impedance of the line
used.
Connecting alphanumeric displays and HMIs
The serial interface (port X11) of the JC-365MC lets you connect HMIs by Jetter.
INFO
Further information
For more information on this topic refer to the application-oriented manual
Controlling alphanumeric HMI devices (LCD) and printers available in the down-
load area of our homepage .
6.2.4 Ports X14, X15 - Ethernet
Ports and
interfaces Ports X14 and X15 let you connect the following devices:
■ PC
■ HMI by Jetter AG, e. g. JV-10xx
■ Any device with Ethernet TCP/IP interface (10/100 Mbits)
Pin assignment
A
B
A
B
1
2
Position Socket LED Color Description
1 X14 A Green LINK: Connection to the network
exists
B Yellow ACT: Data transfer
2 X15 A Green LINK: Connection to the network
exists
B Yellow ACT: Data transfer
Cables for ports
X14, X15 To connect devices to ports X14 and X15, you can order cables separately as ac-
cessories.