Jetter AG
Identification and Configuration | 7
User Manual – JetControl 365MC
57 / 148
JVMDebug
Property
Description
In the given example
52000
Function
IP port for debugger/setup in JetSym
Allowed values
1024 ... 65535
In the event of an illegal
value
52000
Tab. 37:
JVMDebug
Section [FILES]
In section [FILES] the name of the command file for the AutoCopy function is
specified.
AutoCopyIni
Property
Description
In the given example
/SD/autocopy.ini
Function
Command file for the AutoCopy function
Allowed values
Allowed path and file name
In the event of an illegal
value
/SD/autocopy.ini
Tab. 38:
AutoCopyIni
Changing the IP configuration via the configuration file
You can change the IP configuration directly in the
config.ini
configuration file.
To do this, carry out the following steps:
1.
Create on your PC a configuration file named
config.ini
using a text editor
and make the corresponding entries.
2.
Open an FTP connection between the PC and the JC-365MC.
3.
Choose a user login with administrator or system rights.
Default login information:
User: admin, Password: admin
User: system; Password: system
4.
Open the
System
folder of the JC-365MC.
5.
Copy the
config.ini
configuration file you created into the
system
folder.
6.
Clear the FTP connection.
7.
Reboot.
ð
The new configuration is active.
Configuration registers let you also make changes to the IP configuration.
