Jetter JetControl 365MC, Руководство пользователя

Страница: 34 / 148

Jetter AG Electrical connection | 6
User Manual – JetControl 365MC 34 / 148
Y-cable (splitter cable)
INFO
Y-cable (splitter cable)
To use both CAN buses, connect a Y-cable (splitter cable) to port X19.
One end of the Y-cable (CAN 1) lets you use either the JX2 system bus protocol,
or the CANopen protocol (configuration via R 200002077). The other end of the
Y-cable (CAN 2) lets you use the CANopen protocol. The functions of the pro-
gramming interface CANopen STX API implement the CANopen protocol. For
more information, see the application-oriented manual CANopen STX API.
You can order the Y-cable separately as an accessory [
}
142] .
A
A
B
B
C C
1 1
1
2 2
2
3 3
3
4 4
4
5 5
5
6 6
6
7 7
7
8 8
8
9 9
9
Fig. 11: Y-cable (splitter cable) for the CAN bus interface
Position Component Description
A Male sub-D connector,
9-pin For connection to BUS OUT
B Female Sub-D connec-
tor, 9-pin For connection to BUS IN (CAN 1)
C Female Sub-D connec-
tor, 9-pin For connection to BUS IN (CAN 2)
Male Sub-D
Connector (A) The 9-pin Sub-D connector of the Y-cable has the following pin assignment:
Pin Signal Description
1 CMODE0 Commissioning
2 CAN-L Data signal CAN 1
3 GND Reference potential
4 CMODE1 Commissioning
6 CAN-L_2 Data signal CAN 2
7 CAN-H Data signal CAN 1
8 CAN-H_2 Data signal CAN 2