Jands Event 4, Руководство пользователя

Страница: 77 / 78

Software Version 5.0
25/11/02 Draft Page 77
22 Appendix B – Glossary of Terms
NAME MEANING DESCRIPTION
BEAM Beam parameter Changes the beam shape (gobo, frost, zoom etc) in a moving
light fixture.
CHASE Chase A sequence of steps containing different levels for intensity,
colour, beam, etc, plus speed, direction, fade in/out and rate.
COLOUR Colour parameter Changes the colour in a moving light fixture or scroller.
DBO Dead Black Out Button used to turn off all intensity channels.
FILE File A user-defined group of memories, chases and stacks.
FIXTURE Lighting fixture General term for moving yoke and moving mirror intelligent
lights.
FREEZE Page Freeze Page freeze holds memories and chases that have their fader
above zero when new pages or files are loaded.
HTP Highest Takes Precedence A lighting channel parameter typically used to describe
intensity (eg. dimmer channels).
LIBRARY Library list A list of fixtures from different manufacturers, each with
their associated channel parameters, in a text file on floppy
disk. Required to enable patching of fixtures.
LTP Last Takes Precedence A lighting channel parameter typically used to describe
colour, beam, or position.
MASK Masking Masking allows only desired parameters to be re-played.
MEMORY Memory Settings for Intensity, Colour Beam etc that can be recalled
on demand. Can be labelled for easy reference.
MODE Desk Operating Mode
The Event 4 can operate in two modes:
Record – All desk functions are available.
Play – Limited desk functions are available
PAGE Page A factory-defined group of memories and chases.
PALETTE Parameter Palette A group of different settings of the same parameter, eg. each
button within a palette might store a different colour,
different beam, different position, different fixture, etc.
PATCH Patch channels Assign faders, fixture & scroller to DMX channels.
POSITION Position/focus parameter Changes the lamp’s position (focus) on a moving light
fixture. Pan (horiz.) and Tilt (vert.).
PREHEAT Lamp filament preheat Some lamp filaments may need to be preheated (typically 2-
3%) to avoid nuisance tripping of dimmer breakers when
flashing channels to full.
SCROLLER Colour scroller A lamp with a motorised colour gel attached to the front.
STACK Stack A sequence of memories and chases that can be automated
to crossfade from one memory or chase to the next.
WIDE Wide mode Expands the number of available desk channels: