Jands Event 4, Руководство пользователя

Страница: 58 / 78

JANDS – Event 4 Version 5 Users Manual
Page 58 Revision 5.0.0.5 25/11/02
16.1.3 To Change the Operation of the Chase Flash Button
1. Press the
Setup
button to open the Setup Menu.
2. Move the cursor to the
Ctrl
(Controls) field and press the + (On) button to
open the Set Control menu.
3. Move the cursor to the
CHS
field and press the
+ (On)
button to toggle
between
Norm
(Normal) and
Sngl
(Single).
4. Press
Exit
to close this menu.
16.2 Controlling Stacks
To control a Stack you use either a single or two adjacent Assign Masters. To get the
Stack onto these Masters you can use two different Methods. The best Method to use
will depend on the type of show that you are running, as explained below:
16.2.1 Method 1: Using the Assign Stack Menu
This Method is best if you are only using a Stack occasionally or for a specific part of
a show.
1. Press Assign then Stack to open the Assign Stack menu
2. Set the first memory or chase to playback.
3. Press an Assign master flash button to put the Stack on that fader
16.2.2 Method 2: Using the Stack Menu
If you want to have a Stack available all the time it is best to use the Stack menu to
dedicate a fader (or fader pair) to Stack playback.
Press
Stack
button to display the menu
Type First Assign Load Mask
Std M 10.00 1 Off Off
Type
This field can be set to either
Std
,
MTC
or
Prog
.
Std
is the default setting and most commonly used.
MTC
is for playback using Midi Time Code.
Prog
is for playback using Midi Programme messages.
First
Sets the first memory (or Chase) number.
Assign
Sets the Assign Fader/s used to control the stack playback.
Mask
Sets any or all of Intensity, Focus, Colour and Beam to be masked during
playback. Masked parameters are recorded but ignored during playback.
Any letter (IFCB) shown indicates that the parameter will be masked. eg.
if the display shows I-BF only the colour information will play back. All
other parameters will remain under the previous control.
Load
Turns the Stack On or Off. When this field is changed to On (or Off), the
menu is automatically closed.