Jands Event 4 Скачать руководство пользователя страница 19

Страница: 19 / 78

Software Version 5.0

25/11/02

Draft Page

6 Backup

The Floppy Disk Drive is used to save and restore data on a pre-formatted IBM PC
format 3.5 inch diskette.

6.1

Operation – Saving and Restoring a Show File

The Disk drive functions are accessed through the Setup Bkup (backup) menu. In this
menu there are three options:

Press

Setup

then open the

Bkup

submenu to display this menu:

Set Disk Time Date
Bup +to| +to| +to|

This menu contains 3 submenus as follows. Move the cursor to the

Disk

field and

press the

+ (On)

button to open the submenu:

Set Dir File Name To From
Disk | Event Off Off

Dir

The default show file name is Event. If another name has been used the
Dir field can be used to search the disk for show files. Move the cursor to
this field and press the

+ (On)

button.

File

The default show name is Event. An alternate name of up to 8 characters
can be entered when saving.

Move the cursor to this field and press

+ (On)

to Save a file to disk.

From

Move the cursor to this field and press

+ (On)

to Restore a show file.

from the disk.

NOTE:

Do not remove the diskette while the drive light is on.

If no diskette is present in the disk drive when the DISK option is selected,

an error message will be displayed and the DISK transfer will be cancelled.

Time

Date

The TIME and DATE submenus are used to set the the internal clock.
The time and date are added to the disk file attributes when a show is
saved.

NOTE:

Time is displayed in 24 hour mode, eg. 13:00 = 1:00pm. Use the numeric

keypad or + (On) / - (Off) button to set the correct time.

Содержание Event 4















































































Результаты поиска

Содержание Event 4

Отзывы:

Похожие инструкции для Event 4

Бренды по названию

Популярные бренды

Jands Event 4, Руководство пользователя

Результаты поиска

Содержание Event 4

Отзывы:

Похожие инструкции для Event 4

Бренды по названию

Популярные бренды