GAPS
-
User Guide
When the two interrogation frequencies are different, the blanking time is higher than the
acoustic recurrence. In a single transponder mode, you cannot have a blanking time higher
than the acoustic recurrence. So when you use two transponders with two different
frequencies,
make sure to have the correct settings in the transponder hardware
.
Codes
There are, see table above, several families of interrogation/reply codes:
●
Codes 22 / 23
●
Codes 0 to 45
●
Codes Sonardyne Wideband®1
It is recommended to use codes from only one family in the frequency plan. iXblue guarantees
the intercorrelation properties only within the same family of codes.
Sonardyne Wideband® 1 transponders must be in ENABLE state in order to be interrogated
by GAPS.
Figure 37 - Transponder Window
From this window, you can carry out the following tasks:
●
Add a transponder to the list
●
Configure a transponder (interrogation, reply, dynamic positioning mode, filtering)
●
Activate a transponder
●
Remove a transponder from the list
MU-GAPS-AN-005-H - November 2019
85
Содержание GAPS
