GAPS
-
User Guide
5.1.4
E
XTERNAL
S
YNCHRONIZATION
During external synchronization, the acoustic emission of GAPS antenna is set off by an
external appliance. This mode is chosen when GAPS is simultaneously operating with another
acoustic system. A signal is sent to GAPS by one of the two BNC links located at the front
and at the back of the BOX. The parameters associated with external synchronization are:
●
Inhibition
: this is the time after setting off during which GAPS cannot receive other
signals which could activate it at an untimely moment.
●
Activation
: this is the part of the signal where, on reception, the setting off takes place on
a
Rising Edge
of the signal.
●
Min. Duration
: this is the minimum length of time necessary for the setting off after
activation during which the signal must remain stable (high after a rising edge and low
after falling edge). Its values range from 50 µs to 1000 µs.
1.
Click on the menu
SETUP
and select
TRACKING
.
The
TRACKING
window opens.
2.
Select
External
from the
Synchro mode
pull-down list.
The
TRACKING
window shows the following parameters:
3.
Enter the
Inhibition
value.
4.
From the
Activation
pull-down list, set the type of edge on which the acoustic emission is to
be set off to
Rising Edge
.
5.
Select the value of the
Min. Duration
from the associated pull-down list.
6.
Click on
OK
to validate the configuration of the internal synchronization mode.
MU-GAPS-AN-005-H - November 2019
77
Содержание GAPS
