Iwatsu CS-3000 Series Скачать руководство пользователя страница 56

Страница: 56 / 234

Capter 3

Function Setting and Basic Operation

3-10

Curve Tracer CS-3000 Series Instruction Manual

3.3.5 Connecting the measured device with the test adapter CS-501A (Option)

It is not possible to measure at the same time though two kinds of devices to be measured can be

installed in this test adaptor CS-501A. Measure by installing one device to be measured and one

insulation tab.

[Connection procedure]

(1) Open the cover of the test fixture.

If the cover is opened, this instrument is changed to INTERLOCK state and its output is shut

off.

(2) Connect the test adapter CS-501A with the measured device.

1) Select socket A or B depending on the type of the measured device as shown below:

2) Insert the terminals of the measured device into the connection grooves of the socket. Insert

the insulation tab in the socket that becomes empty. (When buying it, the insulation tab is

inserted in socket A or B. )

- For transistor: Connect the collector, base, and emitter to the collector, base, and emitter of

the test adapter.

- For FET:

Connect the drain, gate, and source to the collector, base, and emitter of the

test adapter.

- For diode:

Connect the anode and cathode to the collector and emitter of the test

adapter.

(3) Mount the test adapter on the test fixture.

When mounting the test adapter, push it into the text fixture vertically while keeping its rear

surface parallel to the mounting part of the patch panel.

(4) If the cover of the test fixture is closed after connecting the test adapter, INTERLOCK state is

released and measurement can be carried out.

Caution!

Base resistance and insulation tab

The test adapter CS-501A is equipped with

the short terminal for the base resistance as

an accessory. It can be screwed at both ends

of it.

The resistance with a proper constant is

installed to the base resistance mainly for

protection from oscillation. If an influence by

oscillation is made, install the resistor

element. If not, surely install the short

terminal attached.

In test adaptor CS-501A, insert an accessory

insulation tab in socket A or B not to connect

the measurement element for an accurate

measurement while measuring.

Socket A

Socket B

Содержание CS-3000 Series










































































































































































































































Результаты поиска

Содержание CS-3000 Series

Отзывы:

Похожие инструкции для CS-3000 Series

Бренды по названию

Популярные бренды

Iwatsu CS-3000 Series, Инструкция по эксплуатации

Результаты поиска

Содержание CS-3000 Series

Отзывы:

Похожие инструкции для CS-3000 Series

Бренды по названию

Популярные бренды