Italian Gelato ICETEAM 1927 STARGEL 4, Инструкция по эксплуатации

Страница: 27 / 38

Stargel 4
- 27 -
Stargel 4 - 2018/03 - Rev. 00 EN
5. SAFETY DEVICES
5.1 MACHINE SAFETY SYSTEMS
WARNING!
It is strictly forbidden to operate the machine in case the safety-related devices have
been disabled, altered or tampered with.
ICETEAM 1927 will NOT be held responsible for any damage or injury to persons and/
or property, in case any safety-related devices, designed to grant the safety of operator
and machine, have been disabled, altered or tampered with.
The machine safety systems are:
THERMAL RELAYS
They detect abnormal absorption of beater motor and motor-compressor; if the maximum
calibration values are reached, the machine stops and sets to alarm mode.
Before restoring the operation the triggering cause must be checked.
Thermal relays can be automatically reset.
PRESSURE SWITCH
It protects the cooling system and stops the circuit cooling compressor in case of water shortage in
the circuit itself (water condensing) or lack of air circulation around the condenser (air condensing).
The reset is automatic.
WARNING
If the compressor runs for an excessive time or stops and starts repeatedly, this indicates
insufficient condensation; check the causes.
FUSES
They protect the electric circuit of controls against overloads.
After their triggering, before replacing them, check and eliminate the causes of fault.
NOTE:
To identify values and features of fuses, refer to machine wiring diagram.
NOTE:
Every time a safety system is activated, the machine displays which type of automatic intervention
is active.
MICROSWITCH, LOWER FREEZING SPIGOT DOOR
Every time the spigot door
301
is opened, a microswitch stops the freezer to prevent harm to the
operator; when the spigot door is closed again, mixing starts again.
NOTE:
Every time a safety system is activated, the machine displays which type of automatic intervention
is active.
5.1.1 Operator safety systems