Italian Gelato ICETEAM 1927 STARGEL 4, Инструкция по эксплуатации

Страница: 15 / 38

Stargel 4
- 15 -
Stargel 4 - 2018/03 - Rev. 00 EN
3 INSTALLATION
3.1 ROOM NECESSARY FOR MACHINE USE
The machine must be installed in such a way that air can freely circulate all around its sides.
Enough room must be left free around the machine, in order to enable the operator to act without
constraint and also to immediately leave working area, if necessary.
The minimum room for accessing the working area should be at least 150 cm, which takes into
account the space taken up by open doors, if any.
50 cm
20 in
10 cm
4 in
10 cm
4 in
150 cm
59 in
3.2 MACHINE WITH AIR-COOLED CONDENSER
Machines with air-cooled condenser must be installed at least 50 cm away from the top wall in
order to allow free air circulation around the condenser.
NOTE:
An insufficient air circulation affects operation and output capacity of the machine.
3.3 MACHINE WITH WATER-COOLED CONDENSER
Machines with water-cooled condenser must be installed no closer than 10 cm to side walls in
order to allow free air circulation around the condenser.
Machines fitted with a water-cooled condenser need to be connected to running water supply or
to a cooling tower.
Water must have a pressure of 1 Bar (0.1 MPa) at least, and a flow rate at least equal to the
estimated hourly consumption foreseen.
Connect inlet pipe marked by plate “Water Inlet” to water supply installing a shut-off valve, and
outlet pipe marked by plate “Water Outlet” to a drain pipe, installing a shut-off valve.
WARNING
Machines must be installed with a suitable non-return valve in compliance with local
reference standards.