9 SERVICE PROCEDURES
Part No 1171891
77
Invacare® Top End® Recreation Handcycles
9.15 Replacing the Footrest/Footplates
XLT Series
1.
Remove the hex bolt and locknut that secure the footrest to the fork.
2.
Remove existing footrest from clamp.
3.
Insert new footrest into clamp.
4.
Slide footrest to desired position.
5.
Install hex bolt and locknut. Tighten securely.
6.
Repeat STEPS 1-5 for the opposite footrest if necessary.
Excelerator Series
1.
Remove the button screws and locknuts that secure the footrests to
the footplate clamps.
2.
Align a new footplate on the footplate clamp at the desired depth.
3.
Line up the mounting holes in the footplates with the mounting holes
in the footplate clamps.
4.
Install the button screws into the mounting holes and tighten securely
with the locknuts.
Before disassembly, take note of footrest position.
Fork
Clamp, Hex, Bolt
and Locknut
Footrest
XLT Series
Excelerator Series
Footplate
Button Screw
Locknut
