9 SERVICE PROCEDURES
Invacare® Top End® Recreation Handcycles
54
Part No 1171891
9 Service Procedures
9.1
Installing Hand Crank Handles
Horizontal Handles
1.
Thread the handle into the hand crank (Detail “A”).
2.
Unscrew the handle to remove it from the handcrank.
Installing Tri-pin Quad Handles
1.
Thread the bracket into the handcrank.
2.
Use a 15mm wrench to thread handles and posts into the bracket.
Adjusting Tri-pin Quad Handles and Posts
1.
Loosen socket screws to adjust handle position (Detail “B”).
2.
Tighten socket screws to secure handles in desired position.
WARNING
After any adjustments, repair or service and before use,
make sure all attaching hardware is tightened securely.
Otherwise injury or damage may occur.
If necessary, the rider should hold the handle to determine
the proper position of the handles and posts. The wrist
should go between the two posts.
Horizontal Handle
DETAIL “A” - HORIZONTAL HANDLES/
DELRIN HANDLES
Hand Crank
Tri-Pin
Quad
Handle
DETAIL “B” - TRI-PIN HANDLES
Socket
Screw
Tri-Pin
Quad Posts
Bracket
Thread into Handcrank