XSHIFTER ELink, Руководство пользователя

Страница: 1 / 14

Rev1 Page 1 of 14
Before You Begin
Please read instructions completely before you start.
XShifter Box Contents
Instructions
1) XShifter Mounting Instructions
a) Smart Phone APP (iPhone is released. Android APP not released, Beta review only)
b) ELink Hardware Mounting
c) Cable Connect ELink to Derailleur
d) Button Pod Mounting
2) ELink Set Up and Calibration
a) Auto Mode
b) Manual Mode
3) Button Pod Re-Pairing
4) XShifter App misc. functions and screen pics
5) FAQ / Installation Tips
6) Handcycle Button Pod installation (handcycle option only)
Box Contents
1) Button Pod mounting kit and Instructions for Handcycle Top End Hand Grips
a) Note this is handcycle option only
2) Foam Layer 1 XShifter ELink Paired Kit
3) Foam Layer 2 XShifter ELink Paired Kit
4) Layer 3 White Box: Bagged Hardware Installation Kits
a) Kits are in the white box under the 2nd foam E-Link Kit
An IPod Smart phone is required for the XShifter App.
The XShifter App for Android smart phones is currently not released.
For proper derailleur setting and celebration, the wheel and chain MUST be moving at all times during
the setup/celebration. The ELink may be damaged if there is not chain movement and or the cable may
be stretched.
Chain and wheel movement can be done while on the SportCrafter trainer for the Bike or Handcycle. There is an
optional handcycle adjustment fixture and direction on how to make this stand.
TRY TO NOT MIX UP ELink LAYER 1 PARTS AND LAYER 2 PARTS.
NOTE
Each Pod is already paired to the ELink packed on the same layer in the 2X COMBO KIT. If for any reason these get mixed up, you
can do a simple test to determine which Button Pod corresponds to the ELink or simply re-pair the desired Pod to the desired ELink
using the instructions below.
XShifter ELink Box Contents