ETC echoflex OWS-DT-UW-120/277 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 12

ETC echoflex OWS-DT-UW-120/277 Скачать руководство пользователя страница 1

Echoflex Installation Guide

Wall Switch Sensor OWS

Corporate Headquarters

n

Middleton, WI, USA

|

+1 608 831 4116

Web

echoflexsolutions.com

|

Email

[email protected]

|

Support

[email protected]

©2022 Echoflex Solutions, Inc. Trademark and patent info:

echoflexsolutions.com/ip

Product information and specifications subject to change.
Echoflex intends this document to be provided in its entirety.

8188M2134

Rev A Released 2022-06

Overview

The Wall Switch Sensor (OWS)
combines a switch for manual control
of lights and an occupancy sensor
that uses standard passive infrared
(PIR) or Dual Technology to monitor
occupancy and transmit status
wirelessly.

The sensor fits well in applications
where energy codes require the lights
to be manually turned ON and
automatically turned OFF when the
space is vacant. It is available as a
line-powered or battery-powered
model. The line-powered models are
no-neutral conductor devices that
connect to line voltage and earth
ground. Battery-powered models can operate for 12 years in typical office
use conditions.

Model

Description

OWS-IR-UW-120/277

PIR sensor detection, line-powered

OWS-DT-UW-120/277

Dual Tech sensor detection, line-powered

OWS-IR-UW-BTY

PIR sensor detection, battery-powered

OWS-DT-UW-BTY

Dual Tech sensor detection, battery-powered

The Dual Tech models use PIR and passive microphone technology to
provide full coverage of audible human activity. Innovative noise filtering
prevents false triggers that could keep lights on in empty spaces.

This document covers installation, testing, and settings that apply to all
OWS models. The product package includes the sensor and two
mounting screws. Battery-powered models include non-replaceable
lithium batteries. A white faceplate is sold separately (part number:
HW8563).

1
2
3
...
»

Содержание echoflex OWS-DT-UW-120/277













Отзывы:

Нет отзывов