INSYS WLAN 2.1, Руководство пользователя

Страница: 71 / 98

INSYS WLAN serial 2.1 Overview AT Commands
Command Description
ATA
Manual connection acceptance
ATA
accepts an incoming connection.
ATA
only works when the module previously received packets at the local
port, i.e. issued the command
„
RING
“.
AT&C<n>
DCD behavior
AT&C0
DCD always on
AT&C1
DCD is only active for existing connections (default)
AT#CHAN=<n>
Radio channel for adhoc mode
In adhoc mode, all involved modules must be set to the same channel.
AT#CHAN=1..14
The possible channel settings are restricted in most coun-
tries. In infrastructure mode the radio channel is assigned
by the access point.
The setting can be queried with
AT#CHAN?
.
AT#CTY
=<n>
Country setting
Use
AT#CTY
to define in which country the device will be operated. This is
necessary as different countries require different channel assignments.
Currently, the following countries are supported:
Europe (ETSI), except France and Spain
AT#CTY="EU"
USA (FCC).
AT#CTY="US"
France
AT#CTY="FR"
Spain
AT#CTY="SP"
The setting can be queried with
AT#CTY?
.
This setting is immediately stored in the permanent memory (independent
from the command
AT&W
). It will only take effect after a restart.
71