INSYS WLAN 2.1, Руководство пользователя

Страница: 33 / 98

INSYS WLAN serial 2.1 Initial Operation

SSID, encryption and key are configured as previously described.
1. Click on the "Network" tab.
7.
ning scenario of this manual.
5. Click on Send.
2. Enter for "IP address" the IP address 192.168.1.2

This IP address refers to the commissio
3. Enter the net mask 255.255.255.0.
4. Enter for "port" 1234.

p-

The "RX/TX" LED is blinking during the process.
6. Click OK in the message.
HSComm WLAN transfers the values and the message "send settings" a
pears in the status bar.

The message "settings sent" appears.

The INSYS WLAN serial 2.1 can now be accessed in the network.
ibed configuration using these steps.

The INSYS WLAN serial 2.1 is connected to the WLAN and has the IP address
peration and has the IP address 192.168.1.26.

address
192.168.1.30.
1.
Testing the Configuration
You can test the previously descr
192.168.1.27.

The access point is ready for o
Your PC is connected to the WLAN. The WLAN adapter is configured as de-
scribed in the previous section, is in ad-hoc mode, and has the IP
Click in Windows on Start.
2. Click on "Run".
Enter cmd into the entry field and press the "Enter" key. 3.
4
5.

You will receive the output "Pinging…" as well as "Reply from…".

The command prompt appears.
. Enter the following command here: ping 192.168.1.27
Confirm with the "Enter" key.
33