INSYS WLAN 2.1, Руководство пользователя

Страница: 31 / 98

INSYS WLAN serial 2.1 Initial Operation
192.168.1.27.

The access point is ready for operation and has the IP address 192.168.1.26.

Your PC is connected to the LAN and has the IP address 192.168.1.25.
1. Click in Windows on Start.
2. Click on "Run".
Enter cmd into the entry field and press the "Enter" key.

The command prompt appears.
4. Enter the following here: ping 192.168.1.27
5. r" key.

The INSYS WLAN serial 2.1 is commissioned successfully and can be
the WLAN.

Read out the values using HSComm
again and check the settings.
an-

ted as described in section 9.1.
el
dapter is 6. he role of the WLAN adapter is "Master". The
1. Start the program HSComm WLAN.
2. Click on the Read Settings button to read out the settings from the INSYS
3.
Confirm with the "Ente

You will receive the output "Pinging…" as well as "Reply from…".
reached in
If you get the output "Request Timed Out…", the device has probably been
configured with different IP settings.
9.2.2 Ad-Hoc Mode
How to commission the INSYS WLAN serial 2.1 in a WLAN with ad-hoc mode using
the HSComm WLAN software.
Configuring the WLAN parameters of the INSYS WLAN serial 2.1
It is necessary to configure network mode, SSID (the network name), ch
nel as well as encryption method and associated key that the INSYS WLAN
serial 2.1 can connect to an ad-hoc WLAN.
The HSComm WLAN software is installed on your PC.

The INSYS WLAN serial 2.1 is connec

The WLAN adapter of the PC is in ad-hoc mode and has the IP address
192.168.1.30. The ad-hoc network has the SSID "WLANDEMO". The chann
of the PC WLAN a
encryption method is WEP with 128 bit key length. You know the key.
WLAN serial 2.1.
31