INSYS WLAN 2.1, Руководство пользователя

Страница: 34 / 98

Initial Operation INSYS WLAN serial 2.1

ut "Request Timed Out…", the device has probably been
of
vector.co.jp/authors/VA002416/teraterm.html.
ell as the connections
must already have been made as described in section 9.1.
9.3.1 e Mode
ow to commission the INSYS WLAN serial 2.1 in a network with infrastructure
Co arameters of the INSYS WLAN serial 2.1
ork name) as well
sociated key that the INSYS WLAN serial 2.1
software is installed on your PC.
s sec-
.
1. Start the program TeraTerm.
3. Click in the menu onto "Setup" and select "Serial Port…".
4.
5.
The INSYS WLAN serial 2.1 is commissioned successfully and can be
reached in the ad-hoc WLAN.

If you get the outp
configured with different IP settings. Read out the values using HSComm
again and check the settings.
9.3 Commissioning with Terminal Program
How to commission the INSYS WLAN serial 2.1 using the terminal program "Ter-
aTerm" of T. Teranishi and AT commands. The program TeraTerm is available free
cost on the Internet at http://hp.
The necessary configuration of the auxiliary devices as w
Infrastructur
H
mode using AT commands.
nfiguring the WLAN p
It is necessary to configure network mode, SSID (the netw
as encryption method and as
can connect to a WLAN.

The TeraTerm

The INSYS WLAN serial 2.1 is connected as described in the previou
tion.

The access point is configured and in operation as described in section 9.1
2. Click on "Serial" and select the interface to which your INSYS WLAN serial 2.1
is connected.
Select a baud rate of 19200.
Click on OK .
6. Enter "
AT
" into the terminal window to test the serial connection.
ess the Enter key, the
response "
Ok
" appears.
rface parameters are configured. Return to

You see the string in the terminal window. If you pr

If you see other characters in the terminal window when entering "AT" on the
keypad, probably the wrong inte
step 3 and check the serial interface settings again.
34