INSYS WLAN 2.1, Руководство пользователя

Страница: 64 / 98

Functions INSYS WLAN serial 2.1
11.16 Configuring Terminal Echo
The terminal echo transmits all characters sent via a terminal to the INSYS WLAN serial
2.1 back to the terminal. Without the echo, all inputs are "invisible" and will not be out-
put by the INSYS WLAN serial 2.1. This means that the entered characters will not be dis-
played in the terminal without echo. All AT commands give a response, which will be
output by the INSYS WLAN serial 2.1 regardless of the terminal echo setting.
Terminal echo is enabled by default.
Configuration with HSComm
In order to enable or disable terminal echo , check or uncheck on the "Basic
settings" tabe in the "Result reporting" panel the checkbox "Echo" (Figure 6,
page 44, position 6).
Configuration with AT commands
In order to enable terminal echo , use the
command
ATE1
In order to disable terminal echo , use the
command
ATE0
11.17 Retrieving the Configuration Overview
You can retrieve all current settings of the INSYS WLAN serial 2.1 altogether with this
function. You can save the outputs as text file using the HSComm software.
Configuration with HSComm
In order to retrieve the configuration overview , click in the menu line on the
"Overview" entry (Figure 5, page 43 position 13). You can save the output as
text file using the "ASCII Export" button.
Configuration with AT commands
In order to retrieve the configuration over-
view , use the command
AT&V0
In order to retrieve the diagnosis data of the
last connection , use the command
AT&V1
64