Insportline EM-3231 Скачать руководство пользователя страница 12

Страница: 12 / 55

STEP 4

– PEDAL SUPPORT ARM ASSEMBLY

USE HARDWARE KIT

lease don’t fully secure the Bolt (98) and Nut (109), wait

until point e of Step 4. to fully tighten the bolt and nut.

a. Refer to the left side drawing to cut off the

tie (11A). NOTE:

Please be sure the

Shaft Sleeve (69)

won’t fall out from the front of the

Right Pedal Support Arm (11).

b. Attach the front of the

Right Pedal Support Arm (11)

to the

Right Telescoping Bar (10)

and

slightly attach with one

Bolt, Button Head (M8xp1.25x90mm)(98)

and one

Nut (M8)(109). Please

don’t fully secure the Bolt (98) and Nut (109), wait until point e of Step 4. to fully tighten the
bolt and nut. NOTE:

Please be sure that

Bolt (98)

would screw through the

Shaft Sleeve (69)

inside front end of the

Right Pedal Support Arm (11)

during assembly.

c. Refer to the right side drawing to cut off the

tie (53B). NOTE:

Please be sure the

Shaft Sleeve (69)

won’t fall out

d. Attach the end of the

Right Pedal Support Arm (11)

to the end of the

Right Pedal Linkage Tube

(53)

and fully secure with one

Bolt, Button Head (M8xp1.25x90mm)(98)

and one

Nut (M8)(109).

NOTE:

Please be sure that

Bolt (98)

would screw through the

Shaft Sleeve (69)

inside front end of

the

Right Pedal Support Arm (11)

during assembly.

Содержание EM-3231
























































Результаты поиска

Содержание EM-3231

Отзывы:

Похожие инструкции для EM-3231

Бренды по названию

Популярные бренды

Insportline EM-3231, Руководство пользователя

Результаты поиска

Содержание EM-3231

Отзывы:

Похожие инструкции для EM-3231

Бренды по названию

Популярные бренды