Insportline EM-3231, Руководство пользователя

Страница: 10 / 55

Socket Head (M8xp1.25x90mm)(105) to the Front Stabilizer (2) and the Maine Frame (1) first
before fully secure. **Please do not secure the bolts unless you make sure Bolts all go into
screw holes of Front Stabilizer and Main Frame**
d. Fully secure two Lock Washers (M8)(79) , two Washers (8x16x2.0t)(80) and two Bolts, Socket
Head (M8xp1.25x90mm)(105) that attach to the Front Stabilizer (2) to the Main Frame (1).
e. Follow the above STEP b. to attach the Rear Stabilizer (3) to the Main Frame (1) with two Lock
Washers (M8)(79) , two Washers (8x16x2.0t)(80) and two Bolts, Socket Head
(M8xp1.25x90mm)(105).
STEP 2
– UPRIGHT POST ASSEMBLY
Please don
’t fully secure Nut (M8) (109) until
point h of Step 4.
NOTE: For shipping purpose, four pcs Nuts (M8)
(109) are attached on the top of the Main Frame
(1) .
a. Remove four pcs Nuts (M8) (109) from the
top of the Main Frame (1) and place them on
the safety place for following assembly
process.
b. Slide the Upright Sleeve (25) onto the
Upright Post Assembly (4) Be care not to
pinch the wires.
c. Slightly attach the Upright Post Assembly
(4) to the Main Frame (1) and slightly secure
with four pcs Nuts (M8)(109). NOTE: Please
don’t fully secure Nut (M8) (109) until
point h of Step 4. is complete (Page 9).
d. Connect the Rear Connection Wire (115A)
to the Motor Wire (118). Be care not to
pinch the wires.
e. Connect the Rear Connection Wire (115B)
to the Adaptor Connection Wire (116). Be
care not to pinch the wires.
f. Connect the Rear Connection Wire (115C)
to the Sensor Wire (119) . Be care not to
pinch the wires.
NOTE: After connect the wires, slightly and gently pull two sides of wires to test and make sure
whether the wires are fully connected