9
2.4 Training/Instructions
Personal protective equipment against falls from a height must only be used by persons, who have been instructed according to the
valid national working conditions act. We are pleased to inform you about training for INSTRUCTIONS or COMPETENT
PERSONS.
3
Period of use
The operating life of this safety product essentially depends on the type and frequency of use as well as on the conditions o f use,
diligent care and storage and therefore can not generally be defined.
Products made of chemical fibres (e.g.: polyamid, polyester,
aramid) are subject to certain ageing even if they are not used, especially depending on the intensity of ultraviolet rays as well as on
the climatic environmental influences.
Maximum longevity of 12 years
The maximum longevity of A.HABERKORN products in synthetic and textile material is 12 years from the date of production under
optimal storage conditions and without being used.
Maximum operating life of 10 years
The maximum operating life with occasional, proper use without visible wear and tear under optimal storage conditions is 10 years
from the date of first use.
Storage period of 2 years
The storage period before first use and without reducing the maximum operating life is 2 years from the date of production.
Provided that all instructions on safe handling and storage are observed, the following, non-binding
indications on the lifespan
can be recommended
:
Intensive, daily use
- less than 1 year
Regular use throughout the year
- 1 year to 2 years
Regular seasonal use
- 2 to 3 years
Occasional use (once a month)
- 3 to 4 years
Sporadic use
- 5 to 7 years
Work positioning belts, full body harnesses, sit harnesses:
With normal use in compliance with instructions for use, the realistic period of use
for full body harnesses is 6 to 8 years.
When
properly stored and without being used: 10 years.
Based on: BGR 198
– German trade association rules for safety and health at work (BG rules) / DE.
Metal fittings such as buckles, karabiners, etc.:
The life of metal fittings is generally unlimited; however, a periodic inspection of metal fittings must be carried out regarding
damage, distortion and wear as well as functioning.
When different materials are used in one product, the period of use is subject to the most sensitive materials.
Extreme conditions of use can cause the elimination of a product after only using once (type and intensity of use, field of
application, aggressive environment, sharp edges, extreme temperatures, chemical substances etc.).
A PFPE must definitely be discarded:
in case of damage to supporting parts, which are essential for safety, such as webbings and seams (tears, cuts or other)
in case of damage to plastic and/or metal fittings
in case of strain by a fall or heavy load
after the application period has elapsed
if a product does not seem safe or reliable anymore
if the product is outdated and does not comply with the technical standards anymore (modification of legal regulations,
norms and technical rules, incompatibility with other equipment etc.)
if the history of use is unknown or incomplete (test manual)
if the identification of the product does not exist or if it is illegible or missing (even partly)
if the instructions for use/test manual of the product are missing (because product history can not be tracked!)
See also item: 2) Regulations for the owner of the equipment
If the visual inspection carried out by the user, holder of the equipment or the competent person results in complaint or if the PPE
has elapsed, it has to be discarded. The elimination has to be made in such a way that reuse in action can absolutely be excluded
(e.g. by cutting and disposing of belts, fittings etc.).
In case of frequent use, intensive wear or extreme environmental influences, the allowed period of use becomes shorter. The
decision on the operational capability of the device is up to the responsible COMPETENT PERSON within the prescribed periodic
inspection.
4
Liability (complementing point Caution)
Neither the A.HABERKORN & Co GmbH nor its sales partners assume any liability for accidents in relation to the present product
and consequential personal and/or material damage, especially in cases of misuse and/or incorrect use. In all cases the users are
responsible for risks taken.
5
Product-specific information
All
A.HABERKORN
products may only be combined with CE marked components of a PPE against falls.Textile
A.HABERKORN
products are made of polyester or polyamide yarns and / or a mixture of both materials.
5.1 General Safety Instructions
The use of safety harnesses with fall arrester eyelets according to EN361 is only permitted:
with lanyards according to EN354
with shock absorber according to EN355
with connectors according to EN362
in
restraint and work positioning systems
according to EN363 only with an integrated work positioning belt according to
EN358
