RMV Operations Manual Revision Copyright illunis LLC, 2014
Page 20
CAMERA BACK PANEL
The camera back panel contains the Camera Link and power connectors as well as two dual color
camera Status LED’s.
LED’s
There are four LED's on the back
of the RMV-Camera. The Power
LED indicates that the camera is
receiving 12V DC. The VYSNC
LED flashes when a frame is
sent by the camera.
Power Connection
Connector pin out (from back view)
PIN 6 = GND
PIN 5 = +12V DC
PIN 4 = External Trigger In (3.3V LVTTL)
PIN 3 = Strobe out (3.3V LVTTL)
PIN 2 = RS232 RX
PIN 1 = RS232 TX
Back View
Camera Link
INTERNAL ERROR = RED
POWER = GREEN
VSYNC = GREEN
TRIGMODE
=ORANGE
6
1
5
2
4
3
LED Status Conditions
RED
ORANGE
GREEN Status
off
off
blinking
Normal, no errors
on
off
blinking
Brownout reset
on
on
blinking
Watch Dog Timeout
on
on
blinking
JTAG reset
on
off
on
VSYNC timeout
on
on
off
Invalid EEPROM