![background image](http://html1.mh-extra.com/html/illunis/rmv-11002/rmv-11002_operation-manual_2044107124.webp)
RMV Operations Manual Revision Copyright illunis LLC, 2014
Page 124
10.4: Frame Grabber
Trigger Options
The picture below shows a configuration for triggering a camera with the frame grabber. CC1 is the
trigger signal to the camera. In this configuration, the frame grabber is set to send a high pulse on
10000 us down the CC1 line every 2.5Hz.
It is important to enable the internal frame trigger when using the CC1 trigger signal. But if the camera
is in Free Run, you may want this to be disabled. The frame grabber will update the screen at 2.5Hz in
free run mode even if the camera can run faster.