![background image](http://html1.mh-extra.com/html/illunis/rmv-11002/rmv-11002_operation-manual_2044107132.webp)
RMV Operations Manual Revision Copyright illunis LLC, 2014
Page 132
FAQ# 20:
Basic examples of command sequences.
Example: Single Tap 8 bit triggered
{w0403000000}
Free Run Mode (Set first so camera frames)
{w04020001ff}
Line Clamp mode (a must for triggering)
{w040d0002fe}
8 bit camera link readout mode
{w0400000000}
Single tap mode (forces single channel camera link)
{w02042222bc}
Programmed exposure time
{w04030001ff}
Triggered Program Exposure mode
Example: Dual tap 12 bit partial scan of 256 lines
{w0403000000}
Free Run Mode
{w04020001ff}
Line Clamp mode (a must for partial scan and binning)
{w040d000000}
12 bit camera link readout mode
{w04000001ff}
Dual tap, interleaved data mode (forces dual channel CL)
{w040a0100ff}
Partial Scan start line
{w040a0200fe}
Partial Scan stop line
{w040480037d}
Enable Partial Scan
Example: Single tap 12 bit 8x4 binning
{w0403000000}
Free Run Mode
{w04020001ff}
Line Clamp mode (a must for partial scan and binning)
{w040d000000}
12 bit camera link readout mode
{w0400000000}
Single tap mode (forces single channel camera link)
{w042b0008f8}
Horizontal Binning of 8X (Free run mode)
{w042a0004fc}
Vertical binning of 4X (Free run mode)
{w0404000000}
Enable binning in trigger and free run mode
Example:
Free Run Auto Exposure
{w0403000000}
Free Run Mode (Set first so camera frames)
{w040d000000}
12 bit camera link readout mode
{w04000001ff}
Dual tap, interleaved data mode (forces dual channel CL)
{w041e1000f0}
AE set point to 0x1000 (Depends on sensor and lens)
{w041d0001ff}
Activate Auto Exposure
Example:
Triggered Auto Exposure, camera to output only triggered frames.
Free run in 4x4 binning for faster AE performance
In this example the camera will free run in a 4x4 binned mode.
By using the Async reset feature we can make the camera respond to
a trigger and output a full (non binned) image.
In the free run mode the auto exposure will track and adjust the image brightness.
The auto exposure algorithm will continuously update TPD so that a trigger
assertion will cause a triggered readout of a full frame with the correct exposure.
The disable Runs Valid will disable the LVAL/FVAL signals in free run and a enable
the valid signals only for the triggered image readout.
{w0403000000}
Free Run Mode
{w04020001ff}
Line Clamp mode (a must for partial scan and binning)
{w040d000000}
12 bit camera link readout mode
{w0400000000}
Single tap mode (forces single channel camera link)
{w042b0004fc}
Horizontal binning 4X (Free run mode)
{w042a0004fc}
Vertical binning 4X (Free run mode )
{w0404800080}
Enable binning in free run mode (Not Trigger)
{w04030008f8}
Disable Runs Valid
{w04030005fb}
Enable Async Reset
{w04030001ff}
Triggered Program Exposure mode
{w041e1000f0}
AE set point to 0x1000 (Depends on sensor and lens)
{w041d0001ff}
Activate Auto Exposure