![background image](http://html1.mh-extra.com/html/illunis/rmv-11002/rmv-11002_operation-manual_2044107122.webp)
RMV Operations Manual Revision Copyright illunis LLC, 2014
Page 122
10.2: Frame Grabber
Two Tap Readout
The picture below shows a configuration for a 4M camera in Two Tap Readout mode. The Camera
Geometry is “Two Tap Interleaved”.
In this configuration, the “Data Valid” is “Disabled”. This tells the frame grabber to ignore the
DVAL signal from the camera. The DVAL is only important when horizontal binning is being used.
If the user wishes to bin a two tap camera, this needs to be ‘Enabled”. This active pixels and lines
would also need to be set to the correct values.