RMV Operations Manual Revision Copyright illunis LLC, 2014
Page 34
There are additional ICD commands for specialized control of the RMV camera.
Information on these commands require a nondisclosure agreement. Please
contact illunis at email: [email protected]
Special Commands
04
FF
Base Reset
Write
Resets camera mode to:
free run, runs valid enabled,
no binning, no partial scan,
no line or text displays, no LUT, no PDC,
no digital gain or offset, no test pattern,
reset the LVAL and FVAL defaults.
AE detector counter set to small size.
enable strobe in free run mode
Auto Tap Matcher off
04
D8
Checksum Mode
(Cleared on restart)
Write
0x0000 = Checksum of data
0x0001 = Checksum of command and data
04
D0
Power Up
Write
Resets camera and powers up circuits
04
D1
Power Down
Write
Puts the camera into low power mode
09
00
Auto Tap Matcher
R/W
0 = off, 1 = on