![background image](http://html1.mh-extra.com/html/illunis/rmv-11002/rmv-11002_operation-manual_2044107019.webp)
RMV Operations Manual Revision Copyright illunis LLC, 2014
Page 19
2.3.1: Hardware
Power Connector and Cable Drawing
1
2
3
4
A
B
C
D
4
3
2
1
D
C
B
A
Fax: 952.294.8308
1
illunis, LLC
15713 Elodie Lane
Minnetonka, MN 55345
Phone: 952.975.9203
Fax: 952.294.8308
1
A
28 -Oct-20 03
14 :59 :14
D:\W orkin g\R&D\XMV\x mv-c ab les. dd b - Doc ume nts\XMV_ 12Vp ower_ A
T itle
Siz e:
Num ber:
Date :
File :
Rev ision:
Sh ee t
of
T ime :
A
XMV Power Supply rev. A
illunis LLC Confidential
DO NOT COPY
ENGINE ERI NG AP PROVAL
MANUFACTURI NG AP PROVAL
W IT HOUT P ERMISSION
E rror : illun iswe b. jpg file no t fou nd.
1 2 V
G N D
- suggested receptacle part numbers: Digikey J152-ND, J151-ND
coiled up power supply wire
- accepted 12V power supply part numbers Digikey T806-P5P-ND, Mouser 552-PSA-18U-120
- wires for 12V and GND will be terminated in female "banana" receptacles (red for 12V, black for GND)
- cut DC barrel connector off power supply, find out which wire is positive and which is negative
- solder red banana receptacle to the positive wire
- solder black banana receptacle to the negative wire
- cover wire/receptcacle joints with heat shrink (3/8 or 1/2 inch heat shrink works well) suggested Digikey A038C-4-ND
PROCEDURE:
12V DC switching power supply
Power Supply
This is the manufacturing drawing
for one possible power supply for
the RMV camera. You can use this
drawing as a basis for making your
own.
RMV Power
Cable
This is the manufac-
turing drawing for the
cable for our RMV
camera.
You can use this
drawing as a basis for
making
your
own
cable.
Contact illunis for a
pdf copy of this draw-
ing.