IEMCA KID 80 IV Touch, Инструкция по эксплуатации

Страница: 37 / 122

2 - INFORMATION FOR USE KID 80 SIV
EN
2 - Pag. 23 / 71
no. 2 Facing length
Defines the movement of the bar fore end
according to point (C) (facing point).
Both positive and negative values.
B - Parameter 2 (positive value)
D - Parameter 2 (negative value)
no. 3 Facing mode
Defines the facing operation.
0 - (TO THE LIMIT STOP); once the bar has
exceeded the value defined in parameter 2, it
proceeds until the bar limit stop or until the
tool.
1 - (IN POSITION); the bar is positioned in the
point defined in parameter 2.
2
no. 2 Facing length
DEFAULT VALUE PROGRAMMABLE VALUE
Kid 80 Kid 80
10 /
3
no. 3 Facing mode
in position
DEFAULT VALUE PROGRAMMABLE VALUE
Kid 80 Kid 80
in position /