IEMCA KID 80 IV Touch, Инструкция по эксплуатации

Страница: 55 / 122

2 - INFORMATION FOR USE KID 80 SIV
EN
2 - Pag. 41 / 71
no. 25 Bar feeding handling
0 - (FEEDING END WITH BAR CHANGE): the bar
feeder will stop feeding when the BAR CHANGE
signal is received.
1 - (FEEDING END WITH K1): in the presence of
the BAR END (K1) signal, the bar feeder stops
the feeding.
no. 26 Pieces before the lathe stop
VALUE 0 - The parameter function is disabled.
VALUE >0 - When the set value of pieces
machined is reached, the bar feeder calls the
stop of the lathe whilst "FEEDING".
VALUE >0 - Application example.
1.Set value at 1000:
the display shows:
25
no. 25 Feeding handling
1 - Feeding stop with bar end
DEFAULT VALUE PROGRAMMABLE VALUE
Kid 80 Kid 80
1 0/1
26
no.26 Pieces before lathe stop
0 0
DEFAULT VALUE PROGRAMMABLE VALUE
Kid 80 Kid 80
0 0/>0
no. 26 Pieces before lathe stop
:>1000 (0)