IEMCA KID 80 IV Touch, Инструкция по эксплуатации

Страница: 34 / 122

EN
2 - INFORMATION FOR USE KID 80 SIV
2 - Pag. 20 / 71
2.11 OPERATOR PARAMETERS: DESCRIPTION
no. 1 Bar end adjustment
Defines the position where the bar feeder should
send the "bar end" signal to the lathe.
This value is referred to point (F) (maximum bar
pusher feeding point), and corresponds to the
piece length plus the cutting tool thickness.
Parameter:
A - Bar end adjustment
Subparameters:
B - Bar end K1A adjustment
C - Bar end K1B adjustment
The "Bar end 1 adjustment" subparameter can be used for three separate functions.
1) the subparameter sends an interface signal to the bar feeder-lathe (2nd Bar end);
2) the subparameter allows opening the additional bush;
3) The subparameter sends an interface signal to the bar feeder-lathe (prevents the
headstock from completing the return stroke).
INFORMATION:
Using the "Bar End 1 Adjustment"
subparameter rules out the possibility for
one of the the above mentioned functions of
being used simultaneously with the other
1) the subparameter sends an interface signal to
the bar feeder-lathe
Defines the position where the bar feeder should send
the Bar End Signal 1 to the lathe.
1
no. 1 Bar end adjustment
Bar end 100
Bar end 300
(K1A)
Bar end 500
(K1B)
DEFAULT VALUE PROGRAMMABLE VALUE
Kid 80 Kid 80
A 100 /
B 300 /
C 500 /
no. 1 Bar end adjustment
Bar end
100
Bar end
300
(K1A)
Bar end
500
(K1B)