IEMCA KID 80 IV Touch, Инструкция по эксплуатации

Страница: 47 / 122

2 - INFORMATION FOR USE KID 80 SIV
EN
2 - Pag. 33 / 71
no. 15 Pulse stroke
Defines the length of the forward and backward
stroke of the pulses (see parameter 14).
no. 18 Spindle pulses - on-time
Defines the duration of the ON pulse that the
lathe receives to make the spindle turn.
This is necessary to simplify the entry of the
shaped bars into the collet.
Description of the phase order:
- the bar moves into the slowdown section
(see parameter 11);
- the bar meets the obstacle (the collet) and
the lathe receives the pulses to start turning
the spindle for the set time;
- the spindle slows down and then stops (for
the time defined in parameter 19);
- the bar receives the feeding pulse;
- if the bar is fed into the collet, the cycle
goes on;
- if the bar does not enter into the collet, the
previous phases will be repeated.
15
no. 15 Pulse stroke
DEFAULT VALUE PROGRAMMABLE VALUE
Kid 80 Kid 80
0.15 /
18
no. 18 Spindle pulses on-time
DEFAULT VALUE PROGRAMMABLE VALUE
Kid 80 Kid 80
0.5 /