Programmable Serial-to-Ethernet Device Server
PDS Series User Manual, Version 2.5, Mar. 2019
-
88 -
The following is an overview of the parameters contained in the
IP Filter Setup Page
section:
Item
Description
Set IP1 only
Set a single IP address, the IP address entered in the
“IP1”
and
“IP2/MASK”
text fields will be the same, as the image below shows. Only clients who’s IP
address is included in the filter table are able to connect to the PDS series.
Set IP1 + IP2
Set a range of IP address as a starting and ending point. The initial IP address
must be entered in the
“IP1”
text field and final IP address must be entered
in the
“IP2/MASK”
text field, as the image below shows.
This allows clients who’s IP address is included in the range of
10.0.9.5 to
10.0.9.55
are able to connect to the PDS series.
Set IP1 + Mask
Set the IP Filter (Available IP) range, the IP address must be entered in the
“IP1”
text field and Mask address must be entered in the
“IP2/MASK”
text
field, as the image below shows.
This allows clients who’s IP address is included in the range of
10.0.9.0 to
10.0.9.255
are able to connect to the PDS series.
Note that how to get the IP address range 10.0.9.0 to 10.0.9.255? It’s
calculated as follows:
