Programmable Serial-to-Ethernet Device Server
PDS Series User Manual, Version 2.5, Mar. 2019
-
106 -
4.5.3
Restore to Factory Default Settings
Use the following procedure to reset all parameters to their original factory default settings:
Step 1:
Click the “
Login
” tab at the PDS Misc Setup Page to proceed to the Login Page.
Step 2:
Enter the password in the
“PASSWORD:”
field (use the default password
“admin”
) and click
the “
LOGIN
” button to proceed to the settings page. If you want to change default password,
please refer to
Section 4.5.2 “Change Password”
Step 3:
Check the
“Restore to Factory Default Settings”
option and click the
“UPDATE”
button to
update the setting.
Step 4:
Click the “
Logout
” to complete the operation and
power-on reboot
the PDS series.
Note:
User can restore PDS password to default value “admin” by using “config=RESET” console command
(refer to
Chapter 9 Console/Telnet Commands List
). This command sets most configurations of PDS to factory
setting. It requires rebooting the PDS for loading new configuration (includes default password).
