Programmable Serial-to-Ethernet Device Server
PDS Series User Manual, Version 2.5, Mar. 2019
-
156 -
8.10
@AA(Data)
This function sets the digital output
Syntax:
@AA(Data)[CHK](cr)
$
A delimiter character
AA
The address of the module (01 only for PDS)
(Data)
The output value
1.
(Data) is one character for output channels less than 4
For the PDS(M)-762(D) modules, this will be from 0 to 3
For the PDS(M)-732(D), 734(D), 743(D) modules, this will be from 0 to F
2.
(Data) is two characters for output channels less than 8
For the PDS(M)-721(D) modules, this will be from 00 to 7F
Response:
Valid Command:
>[CHK](cr)
Invalid Command:
?[CHK](cr)
Ignore Command:
*A syntax error or a communication error will result in no response.
>
A delimiter for a valid command
?
A delimiter for an invalid command
!
A delimiter for an ignore command, meaning that the module is in Host
Watchdog Timeout Mode, and the output is set to safe value.
Example:
Command
Response
@013
>
Output value 3, Returns success
@011F
!
Output value 1F. Return that the module is in Host Watchdog Timeout Mode and the output
command has been ignored.
