Programmable Serial-to-Ethernet Device Server
PDS Series User Manual, Version 2.5, Mar. 2019
-
132 -
Step 3: Testing the Virtual I/O
1.
Run the DCON Utility, and click the “
COM Port
” option on the toolbar
2.
Select the
Virtual I/O Port number (the same as Port I/O field in the VxComm Utility)
. Check
115200 and 9600 as the Baud Rate, DCON as the protocol, checksum disabled, parity as none,
and then click the “
OK
” button.
Note:
If your PDS is not equipped with digital I/O lines, the DCON Utility will return an “Open COM error!”
message.
