ICP DAS USA PDS-5000 Series, Руководство пользователя

Страница: 174 / 218

Programmable Serial-to-Ethernet Device Server
PDS Series User Manual, Version 2.5, Mar. 2019 - 174 -
9.3 Command List
Section
Command Description
9.3.1
IPFILTER
Retrieves/Sets the IP addresses that are allowed to access the PDS.
9.3.2 IPCONF Queries the network configuration. (IP/Mask/Gateway/MAC addresses).
9.3.3 SOCKET
Lists all the status of sockets (Listen/Not Used Yet) together with the type of each
socket (TCP Server: Port No./UDP/Unused).
9.3.4 COM Queries or sets the configuration of the COM Ports (Baud Rate/Parity /Stop Bits)
9.3.5 Broadcast
Queries or sets the Broadcast parameter, which determines whether or not the
module can receive Broadcast packets.
9.3.6 SystemTimeout
If PDS has no network communications during the SystemTimeout period, the
PDS will reboot it-self automatically.
9.3.7
SocketTimeout
If there is no data send/receive on the connection during the SocketTimeout
period, the PDS will close the connection automatically.
9.3.8 M
Gets/Sets the echo mode.
/M0: Transparent Mode, Multi-Echo, Data-Shared.
/M1: Slave Mode, Single-Echo, None-Shared.
9.3.9 EchoCmdNo
Queries or sets the EchoCmdNo parameter that enables or disables adding
Command Number before response.
9.3.10 EndChar Sets a character that determines the end of a response string.
9.3.11
IP
Queries or sets the IP address.
9.3.12 MASK Queries or sets the subnet Mask value.
9.3.13 GATEWAY Queries or sets the Gateway address.
9.3.14 MAC Queries the MAC address.
9.3.15
NAME
Queries the module name.
9.3.16 ALIAS Sets the alias for a PDS.
9.3.17
DHCP
Enables/Disables the DHCP client.
9.3.18
UDP
Sets whether to reply to a UDP search command.
9.3.19 VER Queries the version information
9.3.20
SAVE
Determines whether or not backup copies of the "autoexec.bat" and "vcom.ini"
files are saved when using the “load” command.
9.3.21 LOAD
Loads file to the built-in flash disk on PDS. It should be used to update firmware
only.
9.3.22 CONFIG Restores the factory default settings.
9.3.23 RESET Reboots the PDS module.
9.3.24
QUIT
Exits the running firmware.