Vortex86DX-MSJK Windows Embedded CE 6.0 R3 Jump Start Rev 2.2
Page 7 of 144
Vortex86DX-MSJK CE 6.0 Jump Start Kit
The Vortex86DX-MSJK CE 6.0 jump start kit includes the following:
•
VDX-6326, an 800 MHz single-board-computer (SBC), built with the following features:
o
800 MHz Vortex86DX System-On-Chip
o
XGI Z9s Video with VGA output
o
256MB soldered on DDR2 system memory
o
Enhanced IDE (UltraDMA-100/66/33) interface
o
CM119 USB Audio
o
Onboard 4MB SPI flash
o
Three 10/100Mbps Ethernet interfaces
o
Three USB 2.0 Host interfaces
o
Three RS-232 Serial ports and one RS-232/422/485 serial port
o
Parallel port
o
16-bit GPIO (Can be configured as PWM)
o
Internal Mini-PCI expansion slot
o
Type I/II Compact Flash slot (Support storage card only)
o
PC/104 expansion bus
o
PS/2 keyboard & mouse interface
o
Two watchdog timers (Programmable from 30.5µs to 512 seconds
•
Enclosure to house the VDX-6326 SBC
•
Power supply (supports 100~240VAC 50/60 Hz input)
•
512 MB Compact Flash
The 512 MB Compact Flash is preconfigured with Loadcepc bootloader to launch a prebuilt CE 6.0 OS
runtime image. In addition, the Compact Flash also included an Ethernet bootloader, needed to support
custom OS development to download OS runtime image from the development workstation to the target
device.
•
One RJ-45 Ethernet Crossover cable
With a crossover Ethernet cable and proper static IP address settings, the target device can be connected
directly to the development workstation and create a standalone development environment with support
to download CE 6.0 OS runtime image and deploy application to the target device from the development
workstation.
•
One RS-232 null serial cable for serial debug
The RS-232 null serial cable is used to establish connectivity between one of the serial port on the target
device to an available serial port on the development workstation. With proper configuration, debug
messages from target device can be captured by the development workstation using Hyper Terminal or
similar application.
•
Windows Embedded CE 6.0 R3 MSJK software kit, which includes the following:
o
Windows Embedded CE 6.0 R3 (180 days evaluation version) development software.
The evaluation version of the CE 6.0 software is fully functional. Other than the 180 days usage
limit, it has all of the function and feature as the full version.
o
Vortex86DX-MSJK Windows Embedded CE 6.0 R3 jump start CD – This jump start CD
includes the following: