Vortex86DX-MSJK Windows Embedded CE 6.0 R3 Jump Start Rev 2.2
Page 76 of 144
Fig. 75 -
MyWinCE600_SDK x86 Device Properties
•
From the
MyWinCE600_SDK x86 Device Properties
screen, click on the
Configure
button to
bring up the
Configure TCP/IP Transport
screen, as shown in Figure 76.
Fig. 76
-
Configure TCP/IP Transport
•
From the
Configure TCP/IP Transport
screen, select the
Use specific IP address
option, and
enter the target device’s IP address from the earlier step.
•
Click on the
OK
button to close the
Configure TCP/IP Transport
screen.
•
Click on the
OK
button to close the
MyWinCE600_SDK x86 Device Properties
screen.
•
Click on the
OK
button to close the
Options
screen.
Establish Connectivity to CE 6.0 Target Device
To initiate connectivity to the target device, select
Tools | Connect to Device
from the VS2008 IDE,
to bring up the
Connect to Device
screen, as shown in Figure 77.