Vortex86DX-MSJK CE 6.0 Jump Start - Getting Started Guide
Vortex86DX-MSJK Windows Embedded CE 6.0 R3 Jump Start Rev 2.0
Page 134
•
From the Exit Options menu, use the Up/Down arrow key to navigate to the “Load FailSafe
Defaults” and press the “Enter” key.
•
When the “Load Failsafe Defaults?” screen comes up, select OK.
•
From the Exit Options menu, use the Up/Down arrow key to navigate to the “Load Optimal
Defaults” and press the “Enter” key.
•
Press the “Esc” key to go back to the main BIOS setting menu.
•
From the main BIOS setting menu, use the Left/Right arrow key to navigate to the Advanced
Settings menu.
•
Use the Up/Down arrow key to navigate to the IDE Configuration option and press enter to
bring up the IDE Configuration menu.
•
From the IDE Configuration menu, use the Up/Down arrow key to navigate to the “OnBoard
IDE Operate Mode” and press “Enter” to bring up the Options dialog box.
•
Select “Native Mode and press “Enter”
•
Press the “Esc” key to go back to the main BIOS setting menu.
•
Use the Right/Left arrow key to navigate to the Advanced PCI/PnP settings screen.
•
Use the Up/Down arrow key to navigate to the PCI IDE BusMaster option and press “Enter”.
•
From the Options dialog box, select “Enabled” and press “Enter”.
VDX-6326 SBC BIOS Settings to Support CE 6.0
The ICOP_VDX6326_60B BSP is configured to support the VDX-6326 SBC, preconfigured with the
following IDE and PCI-PnP BIOS settings:
•
The “
OnBoard IDE Operate Mode
” setting, one of the Advanced BIOS settings, is configured
to “
Native Mode
”.
•
The “
PCI IDE BusMaster
” setting, one of the Advanced PCI/PnP settings, is configured to
“
Enabled
”.
In addition to the above, check to make sure the 1
st
Boot Device, from the Boot Device Priority
settings, is configured to boot from the correct device.
