Vortex86DX-MSJK Windows Embedded CE 6.0 R3 Jump Start Rev 2.2
Page 58 of 144
The target device’s IP address is needed in the next step. Record the IP address from the DOS
command window.
Configure VS2005 Device Connectivity Settings
To establish connectivity to the CE 6.0 target device, we need to configure the device connectivity
settings for the VS2005 development workstation with the target device’s IP address.
Work through the following steps to configure the device connectivity settings:
•
From the VS2005 IDE, select
Tools | Options
to bring up the Options screen, as shown in
Figure 47.
Fig. 47
-
VS2005 Options
•
Expand the
Device Tools
node on the left pane and click to highlight the
Devices
node.
•
On the right pane, click to select
MyWinCE600_SDK x86 Device
and click on the
Properties
button to bring up the
MyWinCE600_SDK x86 Device Properties
screen, as shown in Figure
48.
Fig. 48
-
MyWinCE600_SDK x86 Device Properties
•
From the
MyWinCE600_SDK x86 Device Properties
screen, click on the
Configure
button to
bring up the
Configure TCP/IP Transport
screen, as shown in Figure 49.
