Vortex86DX-MSJK Windows Embedded CE 6.0 R3 Jump Start Rev 2.2
Page 63 of 144
Fig. 55 -
Visual Studio 2005 IDE
From the VS2005 IDE, select
Build | Build Solution
to build the
VS2005_CSharp_HelloWorld
project.
Preparing Target Device to Connect to VS2005 IDE
Managed code application uses the same native code application’s CoreCon connectivity to establish
connection between the development workstation and target device. Follow and use the same
steps from the native code application exercise in Part-9 of this guide to establish the connection.
Configure VS2005 Device Connectivity Settings
Managed code application can use the same native code application’s CoreCon connectivity with the
same device connectivity settings to establish connection between the development workstation
and target device. Follow and use the same steps from the native code application section in Part-9
of this guide to configure VS2005 device connectivity settings.
Establish Connectivity to CE 6.0 Target Device
To initiate connectivity to the target device, select
Tools | Connect to Device,
from the VS2005 IDE,
to bring up the Connect to Device screen, as shown in Figure 56.