Vortex86DX-MSJK Windows Embedded CE 6.0 R3 Jump Start Rev 2.2
Page 39 of 144
Part 6 –
Build and Generate CE 6.0 OS Runtime Image
In the previous sections, we created an OS design project, configured and customized the OS design. In
the section, we will work through the steps to build and generate a CE 6.0 OS runtime image from the
OS design.
The Build Process – Starting
From the VS2005 IDE, select
Build | Build Solution
to launch the build process.
Fig. 22 -
VS2005 IDE showing the OS design being built.
Depending on the development workstation’s processor speed and available system memory, the
build process may take anywhere from 15 to well over 30 minutes.
During the build process, the output tab on the VS2005 IDE displays compilation activities, as shown
in Figure 22.
The Build Process – Completed
When the build process is completed, the VS2005 IDE should look similar to the screen, as shown in
Figure 23.
