Vortex86DX-MSJK Windows Embedded CE 6.0 R3 Jump Start Rev 2.2
Page 46 of 144
After the device ID is detected and accepted in the
Active target devices
step, the same device ID is
now shown on the
Target Device Connectivity Options
screen, as shown in Figure 30.
Fig. 30 -
Ethernet Download Settings
•
Click on the
Apply
button follow by the
Close
button to save the settings and close the
Target Device Connectivity Options
screen.
Download CE 6.0 OS Runtime Image to Target Device
With the MyTargetDevice connectivity profile created and VDX-6326 SBC associated to this profile,
we are now ready to download the CE 6.0 OS runtime image from the development station to the
VDX-6326 SBC.
From the VS2005 IDE, select
Target | Attach Device
to initiate the download process and bring up
the
Download Runtime Image to MyTargetDevice
screen, as shown in Figure 31.
Fig. 31 -
Waiting for bootme request from target device
•
Power on the target device (or reset the power to the target device).
After the boot up, from the DOS selection menu, press “
2
” or navigate to the second option
using the arrow up/down key (Load OS image from development station with DHCP service)
and press
Enter
to launch the Eboot.bin Ethernet bootloader.
