Vortex86DX-MSJK Windows Embedded CE 6.0 R3 Jump Start Rev 2.0
Figure J-5
All of the bootable devices detected by the BIOS are shown on this screen,
and press enter to bring up the Options screen, and select the USB flash storage device as the 1
Boot Device and press enter.
Press the “F10” key to save the settings and exit BIOS configuration.
The system will reset and boot from the USB f
Note:
After file recovery is done, you need to
Steps to Recover All F
Assuming the VDX-6326 SBC
VDX-6326 SBC able to boot DOS from USB flash storage, work through the following step
the files from the jump start CD
•
Copy the following files from the Jump Start CD to the USB flash storag
\MSJK_Files
\ MSJK_Files
\ MSJK_Files
\ MSJK_Files
\ MSJK_Files
Note:
In addition to the above files, you also need to copy the Himem.sys for the version of DOS
you are using (DOS 6.22 or Windows 98 DOS)
For Windows Millennium DOS, Himem.sys is not needed. When using Windows
Millennium DOS, you need to edit the Config.sys file with a text editor and remove the line
associates with
•
With the Compact Flash
Vortex86DX-MSJK CE 6.0 Jump Start
MSJK Windows Embedded CE 6.0 R3 Jump Start Rev 2.0
All of the bootable devices detected by the BIOS are shown on this screen, Select the 1
and press enter to bring up the Options screen, and select the USB flash storage device as the 1
Boot Device and press enter.
Press the “F10” key to save the settings and exit BIOS configuration.
The system will reset and boot from the USB flash storage.
you need to reconfigure the BIOS to boot from the IDE storage device
Steps to Recover All Files (USB Flash boot to DOS
6326 SBC and bootable USB flash storage configuration were
able to boot DOS from USB flash storage, work through the following step
from the jump start CD:
Copy the following files from the Jump Start CD to the USB flash storag
MSJK_Files\Autoexec.bat
JK_Files\Config.sys
MSJK_Files\Eboot.bin
MSJK_Files\Loadcepc.exe
MSJK_Files\Nk.bin
In addition to the above files, you also need to copy the Himem.sys for the version of DOS
you are using (DOS 6.22 or Windows 98 DOS).
For Windows Millennium DOS, Himem.sys is not needed. When using Windows
Millennium DOS, you need to edit the Config.sys file with a text editor and remove the line
associates with Himem.sys.
Compact Flash inserted, boot VDX-6326 SBC from the USB flash storage.
MSJK CE 6.0 Jump Start - Getting Started Guide
Page 130
Select the 1
st
Boot Device
and press enter to bring up the Options screen, and select the USB flash storage device as the 1
st
reconfigure the BIOS to boot from the IDE storage device.
iles (USB Flash boot to DOS)
n were successful, with the
able to boot DOS from USB flash storage, work through the following steps to recover
Copy the following files from the Jump Start CD to the USB flash storage:
In addition to the above files, you also need to copy the Himem.sys for the version of DOS
For Windows Millennium DOS, Himem.sys is not needed. When using Windows
Millennium DOS, you need to edit the Config.sys file with a text editor and remove the line
SB flash storage.
