iColor I Candy 200 Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 72

background image

|

36

User Manual – February 2020 Edition

Important Note!

Before adjusting any values, print the Test print to see how close you are to alignment. The on-screen graphic is the
same as the print which makes it easier to adjust these values.
Three items can be adjusted here:

•

Tear off/Cut Position

This value adjusts the position of the last label printed after it has been presented for tear off or for cutting.
This only applies if the output mode is set to “Present the label.” Add to the current value to move the tear
point closer to the printer. Subtract from the current value to move the tear point away from the printer. The
value is automatically saved as soon as you set it.

•

Left Margin Offset

This value moves the printed label left or right. Add to the current value to move the printed label to the right.
Subtract from the current value to move the printed label to the left.

Note

Before adjusting this value make sure the label stock is properly loaded so that there is no gap between the edge of
the liner and the fixed throat guide. Any gap at this point will greatly affect the Left margin offset value needed to
align the label. Also, if you adjust the value with improperly loaded label stock you will have to adjust it again if you
load the label stock correctly the next time.

•

Top of Form (TOF)

This value moves the print start position up or down on the label.
Add to the current value to move the printed label down or
toward the printer. Subtract from the current value to move the
printed label up or away from the printer. The value is
automatically saved as soon as you set it.

You may have to make several adjustments to one or more of
these values. After each adjustment you can click the Test button
to print a small test pattern on the label. This will help you find
the proper alignment value.

«
...
35
36
37
38
39
...
»

Содержание I Candy 200









































































Отзывы:

Нет отзывов

Похожие инструкции для I Candy 200

deluxe bread and dough maker

Бренд: Oster Страницы: 60

Бренд: AIGOSTAR Страницы: 8

Бренд: G3 Ferrari Страницы: 18

Бренд: VonShef Страницы: 13

Бренд: Saeco Страницы: 40

Бренд: Kalorik Страницы: 32

Бренд: Hamilton Beach Страницы: 36

TWIN-MATRIX-6-R/L

Бренд: Labelmate Страницы: 6

Бренд: Bunn Страницы: 26

Бренд: Sangkee Страницы: 24

Бренд: Scotsman Страницы: 29

Бренд: Brady Страницы: 48

Commercial K-Cup Series

Бренд: Keurig Страницы: 28

the Oracle BES980UK

Бренд: Sagem Страницы: 22

Бренд: Costway Страницы: 8

Бренд: Hamilton Beach Страницы: 26

La Tessara MP 546

Бренд: White and Brown Страницы: 24

Бренд: Dash Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды