iColor I Candy 200 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 72

background image

|

17

User Manual – February 2020 Edition

E. Set the present/cut mode

The stock sensor mode refers to the method the printer will use to detect the print starting position for each label.
To adjust the stock

Use the

Present/Cut Mode

to adjust how the printer presents labels after they are printed or if/when they are cut

after printing. To adjust the

Present/Cut Mode,

open the IColor PrintHub program.

1. Connect the printer via USB and turn on the power. The

Output/Cut Mode

Setting is stored on the printer

main board, so you will not be able to access it unless the printer is turned on and properly communicating with
the computer.

2. Go to Start - Programs – UniNet IColor Technology – IColor 200 PrintHub.

3. Click on the Label Feed Tab.

4. Click on the

Output/Cut Mode

button.

There are different options available which change if the

Cutter

is enabled or disabled. If the

Cutter

is disabled, the

label present options will be available. If the

Cutter

is enabled the present options are no longer available but cut

options become available.

Cutter Options

Cut After Button Press

This setting will cut after you press the Load/Feed button on the printer. This can be used after one label or an
entire job. This feature is useful if you will not be present at the end of the print to catch the cut label.

Cut after label count

This option will cut after the number of labels specified in the toggle box that appears when this option is selected.
This is useful if you have front/back labels or sets of labels.

Cut after no activity

This setting will cut at the end of a print job if the printer does not receive another print job within one second of
the last print job in the queue. You can use this feature to cut at the end of multi-copy job, multi-page job or
multiple individual jobs in the queue.

Cut every label

This setting will cut after every label.

«
...
16
17
18
19
20
...
»

Содержание I Candy 200









































































Отзывы:

Нет отзывов

Похожие инструкции для I Candy 200

Бренд: Saeco Страницы: 80

Бренд: Rancilio Страницы: 2

Бренд: Saeco Страницы: 2

Бренд: Saeco Страницы: 80

MONZA IMOLA MARANELLO

Бренд: BFC Страницы: 2

Бренд: DeLonghi Страницы: 14

Бренд: Pierro Страницы: 60

MAXX ICE MID200 Series

Бренд: Maxx Cold Страницы: 13

Бренд: Tchibo Страницы: 112

Бренд: Flyte Страницы: 20

Бренд: Bunn Страницы: 17

Бренд: IKEA Страницы: 16

Бренд: U-Line Страницы: 36

Бренд: HPRT Страницы: 18

Бренд: Gourmia Страницы: 10

Бренд: Jenn-Air Страницы: 40

Бренд: Oursson Страницы: 29

Бренд: Russell Hobbs Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды