iColor I Candy 200, Руководство пользователя

Страница: 44 / 72

|
43
User Manual – February 2020 Edition
•
Alignment Tab (Third Tab)
Adjusts vertical and horizontal print alignment. Changes the Stock Sensor Mode and toggles the
Output/Cut Mode.
•
Settings Tab (Fourth Tab)
Displays printer information including firmware version, driver version, and software version.
Check for updates and set other advanced settings.
B. Adjusting print alignment/label offsets
If your previous experience with printing is limited to printing letters and cards to 8.5 inch by 11-inch paper you
probably are not familiar with an essential part of label printing – Print Alignment. Standard printers feed a sheet
and start printing based on the start of the sheet. They also prohibit printing to the edge of the sheet. This is to
avoid any need for alignment. The IColor 200 senses the beginning of the label with an optical edge. Because of
this it is necessary to align the printer to work with specific types of label stock.
The IColor 200 comes from the factory calibrated to print exactly to the edge of IColor label stock. However, due to
variability it may be necessary to fine tune these settings at the beginning of each roll. This is especially true for
other non-IColor brand label stock.