IBM SAN768B, Инструкция по установке, обслуживанию и эксплуатации, Страница: 51 / 208

Remove the cable management comb (see “Removing and installing a cable
management comb” on page 70), and set the parts aside for later reinstallation.
Using the lift tool, the 24–inch load plate, and the bridge tool
Step 1 on page 20 through step 9 on page 21 describe how to use the lift tool (PN
09P2481) and the 24–inch load plate (PN 11P4369) to install a SAN768B in the
cabinet. Step 10 on page 21 through step 23 on page 23 describe how to install the
bridge tool (PN 18P5855) in the cabinet for the lower SAN768B or the upper
SAN768B. This procedure uses parts from the 14U chassis mount kit. See “Items
required” on page 110 for a list of these parts.
svc00169
55 kg ( 121.2 lbs)
CAUTION:
A fully populated SAN768B weighs approximately 159.2 kg (351 lb)
and requires a minimum of two people and a lift tool to install it.
(C011)
Attention: Before you install it, verify that the additional weight of the chassis
does not exceed the cabinet's weight limits or unbalance the cabinet. When you
calculate the additional weight, include the cards or power supplies that partially
extend out of the chassis.
b768ig032
Figure 6. Chassis door removal
Chapter 2. Installing and removing a SAN768B
19